Proto-Typing & Product Development in Fluoroplastics
34 years' of experience with fluoropolymers and bespoke production processes.
Our extensive experience with PTFE sealing and manipulating fluoroplastic materials means we have experienced and solved a wide variety of product and application issues that our customers have brought to us over the years. We welcome these challenges and if involved in your development projects at an early stage, cost savings can be made.
Using combinations of custom manufacturing techniques in conjunction with our thermoforming processes, we are able to produce almost any item in PTFE, FEP, PFA, & PVDF at relative low cost. The fabrication processes we use are particularly economic with small and medium volumes, compared with conventional plastics processing.
We can apply all of these techniques to the PTFE, FEP, PFA, and PVDF tubular, heat shrink and sheet products we supply, to custom manufacture a wide range of products.
We have recently worked with a customer to produce a custom FEP probe cover for their sensor probes. The criteria was that the coating had to be inert, as thin as possible along the length of the probe, with particular attention paid to the thickness of the sealed tip, to aid response times. In addition to this the internal length of the cover was critical and a flange was required on the open end, so that this could be used as a sealing face for when the probe was in situ.
Examples of bespoke components we have developed can be viewed in our gallery.
Still not quite sure which material and fabrication process will best suit your application? Then please don't hesitate to contact our knowledgeable technical sales department on +44 (0)1285 762000 or email@example.com, so that we can discuss your particular requirements in more detail.
Services we offer:
- Very rapid product development and production of samples
- Development service
- Large variety of production techniques
- Service available on most thermoplastics
- PTFE and other fluoroplastics our speciality
- Processing and assembly
- Dedicated clean production area
- Full traceability on all materials
- Sheet fusion butt welding
- Tube end welding (plugging)
- Seam welding
- PTFE coating
- FEP coating
- PTFE sealing
- Heat shrink & sealing
- Heat setting
- Pressure forming
- Transfer moulding