Standard Sizes
| Probe Dia. mm |
Sheath Wall mm |
| 2.8-3.2 |
0.25 |
| 3.8-5.0 |
0.3 |
| 5.5-7.0 |
0.3 |
| 7.0-9.0 |
0.5 |
| 9.5-12 |
0.5 |
| 10-13 |
0.5 |
| 13.2-16 |
0.5 |
Plugged PTFE Tube Probe Covers
Adtech can also supply any size of PTFE tubing terminated with a
welded plug. Adtech have perfected a process for welding PTFE to PTFE. Each
plugged end is electronically tested to 10kV to ensure total integrity of the
weld. The benefits of plugged PTFE sheaths are that any size or wall thickness
can be supplied from standard PTFE tubing stock. Capacitance level sensors are
commonly covered using this technique. However the sheaths are not normally heat
shrinkable.
Complete chemical resistance & non-stick properties using an easy shrink on
sleeve
Adtech probe sheaths are made from FEP which offers the best all round
properties and excellent shrink properties.
They can be easily shrunk in place at
120 deg. C, yet have a working temperature of 200 deg. C.
The total chemical resistance offered by these probes make them attractive for
universal applications, allowing stocking of only one type of probe that can be
used for all environments.
ADTECH also offer a
probe or sensor coating service
- Size range 3mm to 32mm
- Any length possible
- Low shrink temperature does not damage sensor
- Shrink on to any surface
- Flat or domed tip
- Completely unaffected by chemicals & solvents
- Temperature range from -200° to +200°C
- Thermocouple, platinum resistance or thermistor
elements, capacitance & magnetic proximity probes
ADTECH FEP SHRINK-ON SENSOR BOOTS
TIP Styles
Round or Flat
All probe sheaths are available with flat or domed end to suit the
construction of the probe to be coated
