Heat-Shrinkable Lamp Shatterproofing Sleeves

Cover your own lamps easily using Adtex-S Fluorescent UV, Tri-Phosphor, and Incandescent lamps.

NEW!  See our shrink machine in action with our Shrink Sleeves on You -Tube HERE

Adtex heat shrinkable sleeves have been developed specifically to enable distributors, stockists, and large users of lamps to be able to make lamps shatterproof very easily in their own premises in small or large quantities. The process equipment is minimal, and coating can be applied with virtually no training to unskilled personnel.

• Direct cost saving - more profit & added value.
  The cost of lamps coated in house are lower than lamps purchased coated. The base lamp can be bought in volume at low prices, and in various sizes & lengths, but normally only two diameters of Adtex are necessary, and simply cut to the length of the lamp. The labour cost of coating lamps with Adtex is very low as it is a quick & simple & safe process.

• Huge savings on stocking, logistics & space.
  Duplicated lamp stocking is avoided, lamps do not have to travel to & from lamp coating plants. Only lamps for immediate delivery or use need to be coated. Adtex is light & more compact than lamps & does not use much warehouse space. Faster delivery from you to your customer. No waiting for lamps to be coated or supplied. Just coat the lamps you need while packing for despatch.

• No additional transport costs & delays.
  If you have been sending lamps out for coating then the delay and cost of the transport is eliminated.

• Cover ANY manufacturers’ lamps
  You are not restricted to any manufacturer of choice or specification by the lamp coater. Mixtures of lamp types can be coated at the same time.

• UV and incandescent can be successfully coated.
  Adtex-S has been used for over 10 years for coating UV (flykiller and sterilisation) and linear incandescent lamps with no degradation.

• Very simple coating process.
  The coating process developed by Adtech Polymer is very simple, low cost & safe. It does not involve hot air ovens, conveyors or hot air guns. However these can be used to apply the coating if preferred.
  Lamps can be identified with your own labels for repeat orders. It is simple to apply an identification label to the lamp under the coating. This is often used to confirm that the lamp is coated and suggest where replacements can be ordered.

• Minimal set up cost.
  For medium to small volume coating space the size of a medium office desk is required, and one person can coat around 120, 4ft lamps per hour. The cost of the equipment is less than £500.

Adtech Polymer Engineering Ltd. Aston Down East, Stroud, Gloucestershire, GL6 8HX, England.  Phone: +44 (0) 1285 762000. Fax: +44 (0) 1285 760 632.

Email:  sales@adtech.co.uk